USD
  • USD
  • EUR
  • GBP
0

Engine + Drivetrain

ARP Rod Bolt Set for Factory Rods – M20

Description We use these high-strength ARP rod bolts whenever we use factory connecting r...

Description We use these high-strength ARP rod bolts whenever we use factory connecting rods. These are MUCH stronger than the OEM bolts, and certainly a good idea for those looking for more insurance on the bottom end. Torque to 36ft/lb with ARP lube. Stretch should be .008 to .0085

$195.00

ARP Rod Bolt & Nut Set – M30

Product Description New rod bolts and nuts are a mandatory replacement item if you’re reb...

Product Description New rod bolts and nuts are a mandatory replacement item if you’re rebuilding an engine. We asked ARP for years to make these and they have finally come through. The set features high-strength ARP2000 bolts and 12-point jet nuts. Note that the picture is a set for M10. This set includes enough for all 6 rods.

$200.00

ARP Rod Bolt & Nut Set – M10

Product Description New rod bolts and nuts are a mandatory replacement item if you’re reb...

Product Description New rod bolts and nuts are a mandatory replacement item if you’re rebuilding an engine. We asked ARP for years to make these and they have finally come through. The set features high-strength ARP2000 bolts and 12-point jet nuts. Sold as a set of 8 pieces.

$135.00

ARP Main Cap Studs – S54

Description For those who want higher strength and more accurate torque, we have this ma...

Description For those who want higher strength and more accurate torque, we have this main bearing cap stud and nut kit for the E46 S54 6-cylinder engines.

$205.00

ARP Main Cap Studs – M50/M52/S50/S52

Description For those who want higher strength and more accurate torque, we have this ma...

Description For those who want higher strength and more accurate torque, we have this main bearing cap stud and nut kit for the E36 6-cylinder engines.

$175.00

ARP Main Bearing Stud Kit – M30

Description For those who want higher strength and more accurate torque, we have this mai...

Description For those who want higher strength and more accurate torque, we have this main bearing cap stud and nut kit for the M30.

$173.00

ARP Main Bearing Cap Studs – M20

Description We have not seen a big problem with the factory main bearing bolts. But for h...

Description We have not seen a big problem with the factory main bearing bolts. But for higher strength and more accurate torque, we offer these ARP high strength bolts. If you’re rebuilding a race or boosted engine, then these offer a little extra peace of mind. Torque to 54ft/lbs. with ARP lube.

$173.00

ARP Main Bearing Cap Studs – E21 M10/S14

Description While we have not seen a big problem with the factory main bearing bolts, som...

Description While we have not seen a big problem with the factory main bearing bolts, some builders want higher strength and more accurate torque and thus we offer these ARP high strength bolts. Almost as good as studs but at significantly less cost. While this is compatible with the E21 M10 and S14, it is NOT compatible with the 2002 M10 engine.

$103.00

ARP Main Bearing Cap Studs – 2002

Product Description For those who want higher strength and more accurate torque, we have ...

Product Description For those who want higher strength and more accurate torque, we have this main bearing cap stud and nut kit for the 2002 M10.

$128.00

ARP Head Studs – S54

Description Complete set of high-strength ARP2000 headstuds for your E46 M3 6-cylinder en...

Description Complete set of high-strength ARP2000 headstuds for your E46 M3 6-cylinder engine. These are a very good idea for engines setup for track and/or forced induction. These headstuds fit the following cars: 2001-2006 E46 M3 (S54)

$225.00

ARP Head Studs – M50/M52/S50/S52

Description Complete set of high-strength ARP2000 headstuds for your E36 6-cylinder engin...

Description Complete set of high-strength ARP2000 headstuds for your E36 6-cylinder engine. These are a very good idea for engines setup for track and/or forced induction. These headstuds fit the following cars: 1992-1995 325i,325is, 325i (M50 engine) 1996-1999 328i,328is,323is,528i (M52 engine) 1995 US-spec M3 (S50 engine) 1996-1999 US-spec M3 and Z3M (S52 engine)

$240.00

ARP Head Stud Kit – M30

Product Description For race engines. we replace the factory head bolts with these ARP he...

Product Description For race engines. we replace the factory head bolts with these ARP head studs for higher strength, more accurate torque and peace of mind.

$305.00

ARP Head Stud Kit – M20

Product Description For race and turbo applications, we replace the factory head bolts wi...

Product Description For race and turbo applications, we replace the factory head bolts with these ARP head studs for higher strength and more accurate torque. These should be torqued to 62 ft/lb with ARP moly lube (of course, consult the ARP instructions for complete info). NOTE: This is not the off-the-shelf kit packaged by ARP. We feel this kit is actually superior (while still using ARP hardware). Includes the following: x14 ARP2000 studs x14 ARP Nuts x14 ARP Washers

$220.00

ARP Head Stud Kit – M10

Product Description For race engines. we replace the factory head bolts with these ARP he...

Product Description For race engines. we replace the factory head bolts with these ARP head studs for higher strength, more accurate torque and peace of mind. Installation Note: One of the head bolts may come in contact with the baffle for the valve cover breather. In which case it will need some clearancing.

$205.00

ARP Flywheel Bolts

Product Description High grade bolts for your flywheel. Different sizes fit various diffe...

Product Description High grade bolts for your flywheel. Different sizes fit various different BMW models and years so make sure you are ordering the right ones. 22mm will fit: 2002 with 215mm flywheel 28mm will fit: E30 with single mass flywheel E30 with dual mass up until 04/1986 M30 Engines with 240mm Flywheel

$65.00