Smooth Power Flash Tuner Stage 1 Software F8X M2C, M3, M3C, M3CS, M4, M4C, M4CS
Smooth Power Flash Tuner Stage 1 software F80, F82, F83, F87
549 HP @ 6,000 rpm flywheel HP
564 LB/FT @ 3,800 rpm flywheel torque
**Vehicles that have had a software update from a BMW dealer, or new vehicles delivered after June 2019 have an updated bootloader block that currently prevents OBD flashing. In this case, the DME will have to be sent to Carbahn Autoworks for bench loading.
*Gray -> Stage 1 | Green -> OEM
The smooth power flash tuner can upload your stock file for safe keeping, read and clear faults. It can receive software updates from your PC emailed to you by CarBahn. These files can be free updates or increased performance tunes that to match hardware upgrades you purchase from CarBahn. The software comes with a two-year product warranty, as well as a factory-matching 4 year/50,000mi powertrain warranty.* (Please see bottom of page for details)
CarBahn software is designed to deliver the highest safe output possible. Smooth Power means software tuned correctly, not over-tuned. We always try to make a natural torque curve, not excessive torque at low RPM that falls off rapidly at high RPM. Excessive torque will break the tires loose, break the engine and drivetrain. Managed torque with a smooth delivery makes the car easier to drive thereby faster and more reliable. Most if not all our competitor’s tunes attempt to run too much boost, resulting in active knock corrections which causes surging during acceleration. CarBahn software also incorporates torque reduction in 1st and 2nd gears for manageable power delivery.
Most if not all tunes on the market except CarBahn’s reduce safety parameters in the software in an attempt to extract more power. These safety parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are tuned into your OEM software to prevent engine and catalyst failure. When we reduced all the supposed power robbing software protections we lost less than 8 HP and 8 LB/FT Torque. We have seen many damaged engines as result of reducing these safety parameters! It hardly seems worth it for 8HP.
Doing it yourself:
A note on self-tuning tools. There are now programs available that you can buy to tune your car yourself. Many of these tools come with canned programs. Be careful as tuning a high output engine requires tremendous knowledge and experience to extract maximum power without damage.
A note on down pipes (removing the catalyst). We have run back to back dyno runs with the cat on and off and the power gain is much smaller than most people claim. We all need to breathe the air. Its difficult to get your car its required emissions test without catalyst and it’s illegal.
High boost with stock engine:
We have seen many damaged engines as result of making too much power with a stock engine. While modern engines are very reliable, it is easy to add large turbochargers and water methanol injection and break the engine. On the F8X, maximum safe power on a stock engine is 600 LB/FT flywheel torque. CarBahn makes high performance engines designed to handle more power. More information is available on this web site.
About Steve Dinan:
Steve Dinan has over 40 years of street car turbo experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.
*Registration with CarBahn Autoworks at time of purchase is required in order to maintain matching warranty coverage. CarBahn Autoworks reserves the right to deny warranty program enrollment under certain conditions. Please contact us prior to purchase if you have any questions.
*Warranty valid on U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn Autoworks’ products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), commencing on the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn Autoworks’ warranties are transferable when ownership of the vehicle into which the CarBahn Autoworks products were originally installed is sold. The warranty will, without charge for parts or labor, repair or replace the defective CarBahn Autoworks’ component(s), as well as any original vehicle manufacturer’s component(s) that may have been directly affected by a CarBahn Autoworks component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn Autoworks. Parts for which replacements are supplied under this limited warranty become the property of CarBahn Autoworks. In all cases, a reasonable period of time must be allowed for warranty repairs to be completed.
If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, for two (2) years from the original purchase date of the CarBahn Autoworks product, CarBahn Autoworks will repair or replace, at its sole discretion, any defective CarBahn Autoworks component. This warranty does not include reimbursement for repairs to any original vehicle manufacturer’s component(s) that may have been affected by a CarBahn Autoworks component.
Return shipping charges, towing charges, rental car fees damage to a component or assembly due to the installation of replacement parts with specifications that differ in any material respect from the original vehicle manufacturer’s or CarBahn Autoworks parts, damage resulting from the unauthorized modification of a CarBahn Autoworks part or assembly, damage resulting from the use of other manufacturer’s products in conjunction with CarBahn Autoworks’ products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts when replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant and refrigerant, mechanical adjustments or repairs which result from normal wear and tear, drive-belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, engine damage resulting from alteration of CarBahn Autoworks’ original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn Autoworks component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as re-furbished and are warranted for the period specified for that particular product).