add wishlist add wishlist show wishlist add compare add compare show compare preloader
We are currently experiencing longer than average ETA's due to global supply chain issues. We apologize for any inconveniences this may cause.
USD
  • USD
  • EUR
  • GBP
0

Engine + Drivetrain

Macht Schnell F-Chassis Boost Metering Block

The Macht Schnell Boost Metering Block is a bolt-on installation without the need for ...

The Macht Schnell Boost Metering Block is a bolt-on installation without the need for drilling or tapping into factory charge pipes. Comes complete with O-rings and extended-length screws for simple installation in minutes. The Boost Metering Block is essential for boost readings while on the dyno, or for connecting an analog Boost pressure/vacuum gauge on the dyno. When not in use, the included rubber cap will properly seal the port off safely.   Supported Models: F82 / F83 M4 F8...

$59.00

Future Classic E9X M3 Wrinkle Valve Cover Set

The E9X M3 is getting on in age now, and with age comes the need for maintenance. The ...

The E9X M3 is getting on in age now, and with age comes the need for maintenance. The S65's magnesium valve covers eventually leak and the oil runoff can cause the valve covers to bubble and flake. On the inside, too, flaking is often realized along with a mustard-like paste that can take hours to remove, and infinitely longer to fully refurbish. Future Classic's replacement valve cover sets are fully plug and play, use factory cores, and are meticulously powder coated in beautiful...

$1,812.33

Fall-Line Motorsports F90 M5 Oil Cooler Guard

The F90 M5 cars are incredibly well sorted from a cooling standpoint. Even in a road c...

The F90 M5 cars are incredibly well sorted from a cooling standpoint. Even in a road course environment with extremely high ambient temperatures, the F90 engine tends to operate beautifully, with consistent oil and water temperatures. BMW M invested a great deal of time, money, and effort into designing a cooling system that worked in nearly every condition. Although excellent ducting, good core design, strong fans, and other factors all play in to how well a cooling system works, ...

$1,060.00

VRSF - Aluminum Oil Catch Can - BMW N54

Keep your intake tract free of oil with our baffled aluminum oil catch can. N54 motors are prone ...

Keep your intake tract free of oil with our baffled aluminum oil catch can. N54 motors are prone to excessive blow by which causes the entire intake tract to gunk up with oil and directly contributes to issue where the intake valves get caked with burnt oil creating excessive carbon deposits. This can be prevented with the use of our properly designed oil catch can that was built specifically for the N54 motor to ensure you don’t suffer power loss as well as additional maintenance costs cause...

$169.99

Mishimoto - Baffled Oil Catch Can - BMW F8X M3 ...

Give your 2015–2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can...

Give your 2015–2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition—blow-by.The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate ...

$340.77

Fuel Level Sending Unit – BMW E10 2002

Product Description Comes with O-ring and little plastic fuel hose adapter tube. Please s...

Product Description Comes with O-ring and little plastic fuel hose adapter tube. Please select which length you need. 200mm (8″) as seen on 1967-08/1973 224mm (8-3/4″) as seen on 09/’73-1976

$135.00

Eventuri Carbon Fiber Intake M240I · 340I · 440...

The B58 Eventuri intake system is another example of our “Complete System” principal.  It demonst...

The B58 Eventuri intake system is another example of our “Complete System” principal.  It demonstrates the perfect balance between allowing for unrestricted airflow with our open filter housing whilst maintaining low IAT by cold air saturation with our scoop and shield combination. Every detail has been meticulously developed from the prepreg carbon pieces to the double layer heat shields.  This intake sets a new benchmark in design and craftsmanship for the B58 platform. The B58 Eventuri sys...

$1,395.00

Eventuri Carbon Fiber Intake F22 M235i

The F40 M135i Eventuri intake system was developed through extensive real world testing and airfl...

The F40 M135i Eventuri intake system was developed through extensive real world testing and airflow simulation analysis.  It features our patented Venturi housing system with an integrated Mass Air Flow sensor section for the smoothest possible airflow to the turbo inlet tube.  The housing encases our bespoke generation 2 dry filter which helps to shape the airflow to maintain laminar conditions.  The housing seals to the front duct which has been maximized in volume to reduce any potential r...

$1,475.00

Eventuri Carbon Fiber Intake E46 M3

The E46 M3 intake system is a result of extensive data logging, dyno testing and design optimisat...

The E46 M3 intake system is a result of extensive data logging, dyno testing and design optimisation. Our aim was to develop an intake system for the S54 engine which worked with the stock ECU map and MAF sensor and produced a genuine improvement in the driving experience. The E46 M3 Eventuri system uses our Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube.  Not just another cone filter with a heat shield but a unique...

$975.00

Eventuri Carbon Fiber Intake E90 · E92 M3

The BMW E9X M3 Eventuri intake system is the result of extensive research and optimisation which ...

The BMW E9X M3 Eventuri intake system is the result of extensive research and optimisation which improves possibly one of the best designed stock intake systems we have seen. The E9X stock airbox system is a brilliantly designed intake with an excellent flow path and feed system for ambient air.  However on closer inspection, there are restrictions in the inlet tube connecting the airbox to the inlet manifold.  By redesigning the tube yet maintaining the airbox, we have been able to allow the...

$965.00

Eventuri Carbon Fiber Intake F10 M5

The F10 M5 intake system was developed through extensive dyno testing, maximum velocity tests and...

The F10 M5 intake system was developed through extensive dyno testing, maximum velocity tests and flow optimisation. We have developed a complete system from front air ducts to filter housings and even inlet tubes to the turbos.  The resulting system is very efficient and reduces the resistance to the turbos by giving a smooth path for the airflow to travel through. The F10 M5 Eventuri system uses our Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path...

$2,395.00

Eventuri Carbon Fiber Intake F22 · F23 · F87 M2...

Our updated F22 N55/M2 Eventuri intake system is a perfect example of our “Complete System” princ...

Our updated F22 N55/M2 Eventuri intake system is a perfect example of our “Complete System” principal.  It demonstrates the perfect balance between allowing for unrestricted airflow to our Venturi housing and cold air saturation with our scoop and new sealed duct combination. The new sealed duct and heat shield combination ensures that engine bay heat is kept away from the filter and therefore IATs are kept to a minimum.  Every detail has been meticulously developed from the prepreg carbon pi...

$1,345.00

Eventuri Carbon Fiber Intake E60 M5

The E60/E63 M5/M6 intake system is designed to make a positive impact for the whole driving exper...

The E60/E63 M5/M6 intake system is designed to make a positive impact for the whole driving experience. By taking advantage of aerodynamic principles and using computational fluid dynamics to optimise the airflow, we have engineered an intake system which delivers on all fronts – sharpened throttle response, more torque and power, improving driveability and of course, an amazing V10 induction sound. The S85 Eventuri system uses our Patent Pending Carbon fibre Housing which provides an aerodyn...

$1,455.00

Eventuri Carbon Fiber Intake F06 · F12 · F13 M6

The F12/F13/F06 M6 intake system was developed through extensive dyno testing, maximum velocity t...

The F12/F13/F06 M6 intake system was developed through extensive dyno testing, maximum velocity tests and flow optimization. We have developed a complete system from front air scoops to filter housings and even inlet tubes to the turbos.  The resulting system is very efficient and reduces the resistance to the turbos by giving a smooth path for the airflow to travel through. The F12/F13/F06 M6 Eventuri system uses our Patent Pending Carbon fiber Housing which provides an aerodynamically effic...

$2,545.00

Eventuri Carbon Fiber Intake F87 M2 Competition

The F87 M2 Competition intake system is designed to to allow the turbos to work more efficiently....

The F87 M2 Competition intake system is designed to to allow the turbos to work more efficiently.  By replacing the stock airbox system with our Patented Venturi filter housings and smoothly curved tubes, the airflow to the turbos is more laminar thus they can spool with less drag.  Since the M2 Competition does not have air openings behind the grills, we also added sealed ducts to ensure that the intake temperatures stay as low as possible. The combination of our Venturi housings, organicall...

$2,245.00

Eventuri Carbon Fiber Intake E85 · E86 Z4M

The Z4M intake follows on from our E46 M3 system as a result of extensive data logging, dyno test...

The Z4M intake follows on from our E46 M3 system as a result of extensive data logging, dyno testing and design optimisation.  Our aim was to develop an intake system for the S54 engine which worked with the stock ECU map and MAF sensor and produced a genuine improvement in the driving experience. The Z4M Eventuri system uses our Patent Pending carbon fibre housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube.  Not just another cone filter with a he...

$945.00

Eventuri Carbon Fiber Plenum E90 · E92 M3

Introducing our E9X M3 Carbon Fiber Plenum.  Made from 100% high grade prepreg carbon including t...

Introducing our E9X M3 Carbon Fiber Plenum.  Made from 100% high grade prepreg carbon including the internal trumpets, this plenum replaces the stock plastic version and unleashes the roar of the naturally aspirated BMW V8 engine.  Since the trumpet lengths are tuned by BMW to the internal volume, changing this could result in a loss of performance so we kept the same volume to not upset the way the car drives in terms of power delivery.  Although there isn’t a performance gain from the carbo...

$2,465.00 $2,581.64 (2 variants)

Macht Schnell E9X M3 Underdrive Pulley Kit

DualDrive design allows maximum performance, with minor affect on accessory speed. Pro...

DualDrive design allows maximum performance, with minor affect on accessory speed. Proper cooling temperatures are retained at proper levels on or off the track. Maintains proper alternator speed, allowing sustained levels to sensitive control modules. Machined from 6061-T6 aerospace aluminum. T3 Hard-Anodized for maximum strength and corrosion/wear resistance. No affects to crankshaft dampening or harmonics. Simple bolt-on installation

$295.00

IND Painted E9X M3 (S65) Engine Cover

Most custom paint finishes available. Contact us to discuss your ideas and get a custo...

Most custom paint finishes available. Contact us to discuss your ideas and get a custom quote. S65tuCORE EXCHANGE REQUIRED.

$650.00

IND F8X M3 / M4 Painted Engine Cover

The fit of our painted engine cover is identical to factory because the cover is a fac...

The fit of our painted engine cover is identical to factory because the cover is a factory-original piece, built by BMW, and by painting these OEM parts at IND's own in-house paint facility, we've ensured a nearly perfect paint match every time. Every member of our paint staff has at minimum 10 years of experience at our in-house 10,000 square foot facility. We offer almost all factory BMW colors, including BMW Individual. Please contact us for custom color options. DIY installatio...

$479.00

IND F87 M2 Competition Painted Engine Cover

The fit of our painted engine cover is identical to factory because the cover is a fac...

The fit of our painted engine cover is identical to factory because the cover is a factory-original piece, built by BMW, and by painting these OEM parts at IND's own in-house paint facility, we've ensured a nearly perfect paint match every time. Every member of our paint staff has at minimum 10 years of experience at our in-house 10,000 square foot facility. We offer almost all factory BMW colors, including BMW Individual. Please contact us for custom color options. DIY installatio...

$479.00

IND F82 M4 GTS (S55) Painted Engine Cover

Bring some signature style all the way down to your engine. With the IND F82 GTS Paint...

Bring some signature style all the way down to your engine. With the IND F82 GTS Painted Engine Cover, you can inject your own aesthetic into every detail of your BMW. We guarantee the highest quality around; our painter’s have a combined 30+ years of experience, so you’re sure to get the best paint job possible. DIY installation instructions and photographs are available here. Please contact us for custom color options.

$479.00

IND E82 1M (N54) Painted Engine Cover

The fit is identical to factory because the engine covers are factory-original pieces,...

The fit is identical to factory because the engine covers are factory-original pieces, built by BMW, and by painting these OEM parts at IND's own in-house paint facility, we've ensured a nearly perfect paint match every time. Every member of our paint staff has at minimum 10 years of experience at our in-house 10,000 square foot facility. We offer almost all factory BMW colors, including BMW Individual.   Please contact an IND representative for custom inquiries. 

$485.00

Fall-Line Motorsports F87 M2 Competition Oil Co...

S55-equiped cars are incredibly well sorted from a cooling standpoint. Even in a road ...

S55-equiped cars are incredibly well sorted from a cooling standpoint. Even in a road course environment with extremely high ambient temperatures, the S55 engine tends to operate beautifully, with consistent oil and water temperatures. Although excellent ducting, good core design, strong fans, and other factors all play in to how well a cooling system works, there are ultimately two factors which cannot be circumvented—you must have enough heat exchanger surface area, and you must ...

$695.00

Fall-Line Motorsports F8X M3 / M4 Oil Cooler Guard

MADE IN THE USA. The F8x M3 and M4 cars are incredibly well sorted from a cooling stan...

MADE IN THE USA. The F8x M3 and M4 cars are incredibly well sorted from a cooling standpoint. Even in a road course environment with extremely high ambient temperatures, the S55 engine tends to operate beautifully, with consistent oil and water temperatures. BMW M invested a great deal of time, money, and effort into designing a cooling system that worked in nearly every condition that the M3 and M4 would be tested in. Although excellent ducting, good core design, strong fans, and ...

$695.00

Eventuri F8X M3 / M4 (S55) Carbon Engine Cover

Never skimp when it comes to your BMW. That’s why, for Carbon Fiber pieces, Eventuri i...

Never skimp when it comes to your BMW. That’s why, for Carbon Fiber pieces, Eventuri is always the right choice. They’ve built an illustrious reputation around offering some of the best looking and best fitting Carbon Fiber air intakes in the world. Even better, their manufacturing is second to none; they have a wide range of experience in crafting some of the most complex shapes around. The result? An ability to take on any cosmetic component with ease, ensuring you a level of bui...

$840.00

Eventuri F87 M2 (N55) Carbon Engine Cover

Eventuri has produced the BMW N55 engine for the F87 M2 made in 100% prepreg carbon fi...

Eventuri has produced the BMW N55 engine for the F87 M2 made in 100% prepreg carbon fibre. The M2 version uses the metal M Power strip from the OEM engine cover, and has to be manually migrated onto the Eventuri carbon engine cover.  Emblems are not included. 

$950.00

Eventuri F-Chassis (N55) Carbon Engine Cover

Eventuri BMW N55 Carbon Engine cover Supported Models F22 M235i F30 335i F34 335i F32...

Eventuri BMW N55 Carbon Engine cover Supported Models F22 M235i F30 335i F34 335i F32 435i F33 435i F36 435i  

$950.00

Eventuri E46 M3 (S54) Carbon Engine Cover

BMW S54 ENGINE COVER Prepreg Carbon Fiber Engine cover We have produced the BMW S54 e...

BMW S54 ENGINE COVER Prepreg Carbon Fiber Engine cover We have produced the BMW S54 engine cover in 100% prepreg carbon fiber. Available in black carbon fiber and also in red, blue and yellow carbon/kevlar hybrid material.

$870.00

Eventuri BMW B58 Carbon Engine Cover

Eventuri BMW B58 Carbon Engine cover. BMW Roundel not included, this can be swapped ov...

Eventuri BMW B58 Carbon Engine cover. BMW Roundel not included, this can be swapped over from your factory engine cover.  Supported Models F22 M240i F30 M340i F32 440i F36 440i

$745.00

Eventuri A90 Supra Carbon Engine Cover

Accepting Pre-Orders

Accepting Pre-Orders

$695.00

Dinan F87 M2 Dual Core Intercooler

Dinan's unique dual core intercooler design for the F87 M2 engine promotes impressive ...

Dinan's unique dual core intercooler design for the F87 M2 engine promotes impressive pressure drops and a wider power band along with astounding cooling characteristics that nearly guarantee 'heat soak' a thing of the past.  More heat in turn robs some of the power you just gained. A larger high performance intercooler combats the heat and those power gains are protected. The Dinan dual core intercooler provides a 278% increase in face area along with an equally impressive increa...

$999.95