USD
  • USD
  • EUR
  • GBP
0

Forced Induction

VRSF - N55 Downpipe Upgrade - BMW F22/F30/F32/F87

We are proud to introduce our VRSF catless & catted downpipe for your N55 BMW. This downpipe ...

We are proud to introduce our VRSF catless & catted downpipe for your N55 BMW. This downpipe is THE best bang for the buck mod available. This downpipe is available in both catless (race) & catted configuration. Back pressure is significantly reduced by eliminating the restrictive catalytic converter in the factory downpipe with our catless or high flow 200 cell race cat which results in faster spool, an increase in power & a more aggressive exhaust note. VRSF downpipes are hand c...

$249.99

VRSF - 3″ Stainless Steel Catless Downpipes - B...

We are proud to introduce our VRSF 3″ Stainless Steel Catless Down Pipes for the N54 535i & 5...

We are proud to introduce our VRSF 3″ Stainless Steel Catless Down Pipes for the N54 535i & 535xi. These 3″ downpipes are THE best bang for the buck mod available, with gains from 25hp & 30tq when tuned. By eliminating the restrictive catalytic converters in the factory downpipes, back pressure is reduced significantly which results in faster spool, an increase in power & a more aggressive exhaust note. Rather than necking down closer to the turbos like most of our competitors, ou...

$399.99

VRSF - Performance HD Intercooler FMIC Upgrade ...

Replace your inefficient factory intercooler with a VRSF upgraded intercooler kit to get the most...

Replace your inefficient factory intercooler with a VRSF upgraded intercooler kit to get the most out of your N20, N26 & N55 BMW. Our intercoolers are designed to be the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Each VRSF intercooler includes our proprietary High Density fin pack which results in higher HP gains compared to the other guys, mainly due to our incredibly dense in...

$379.00

Active Autowerke High Performance 42mm Blow Off...

Replacment diaphragm for your Active Autowerke 42mm Blow Off Valve!

Replacment diaphragm for your Active Autowerke 42mm Blow Off Valve!

$35.00

VRSF - Stainless Steel Downpipe - BMW B58

We are proud to introduce the VRSF 4.5" catless downpipe for your B58 engine. This 4.5" downpipe ...

We are proud to introduce the VRSF 4.5" catless downpipe for your B58 engine. This 4.5" downpipe is THE best bang for the buck mod available. By eliminating the restrictive catalytic converter in the factory downpipe, back pressure is reduced significantly which results in faster spool, an increase in power & a more aggressive exhaust note. This catless downpipe features a full 4.5" stainless steel design as well as a CNC 304 grade stainless steel flange that offers a smooth transition fr...

$299.99

VRSF - Charge Pipe Upgrade Kit - BMW N55

Increase throttle response and decreases turbo lag with the VRSF Charge Pipe Upgrade for your F-c...

Increase throttle response and decreases turbo lag with the VRSF Charge Pipe Upgrade for your F-chassis M2, M235i, 335i & 435i. Every VRSF Charge Pipe is constructed from mandrel bent, T6061 grade aluminum including the flanges. Each flange is precision machined from CNC billet aluminum, including the throttle body, intercooler and vacuum connections. After these are tig welded and hand finished, they’re tested on multiple jigs in order to ensure proper fitment and a reliable, leak free c...

$219.99

VRSF - Charge Pipe Upgrade Kit - BMW F20/F30 N2...

Increase throttle response and decreases turbo lag with the VRSF chargepipe for your 128i/228i/32...

Increase throttle response and decreases turbo lag with the VRSF chargepipe for your 128i/228i/328i/428i. Our aluminum chargepipe features a CNC billet aluminum OEM throttle body flange and is finished in powder coated black. The VRSF chargepipe retains the OEM c-clip in order to provide a better seal over a conventional clamp/coupler design. One plugged meth bung is also included for those who are currently using meth or interested in using meth in the future. Our chargepipes include a plugg...

$219.99

BP Engineering - S55 Titanium Charge Pipe Set -...

Introducing BP Engineering’s Charge Pipe Set for the 2015+ BMW F8X M3/M4 & the All-New 2019 F...

Introducing BP Engineering’s Charge Pipe Set for the 2015+ BMW F8X M3/M4 & the All-New 2019 F87 M2 Competition. Worry free boost without fear of damaging the fragile plastic OEM charge pipes. BP Engineering's Titanium Charge Pipes are an essentially bulletproof solution to the fragile plastic OEM charge pipes. Hand fabricated titanium "pie-cuts" allow smooth transitions and minimal obstructions. Oversized 2.25" piping match up to the factory turbo outlets, ensuring maximum flow without ob...

$1,595.00

VRSF - Stainless Steel Catless Downpipes - BMW ...

We are proud to introduce the VRSF 3" Catless Downpipes for the S55 engine (F8X M3/M4 & F87 M...

We are proud to introduce the VRSF 3" Catless Downpipes for the S55 engine (F8X M3/M4 & F87 M2C), which are one of the only downpipes to feature a cast stainless steel v-band to pipe transition. These 3" downpipes are the best bang for the buck mod available for your S55, with gains from 25hp & 30tq when tuned. By eliminating the restrictive catalytic converters in the factory downpipes, backpressure is reduced significantly which results in faster spool, an increase in power & a ...

$499.00

VRSF - Stainless Steel Downpipe - BMW N55 (E-Ch...

We are proud to introduce the VRSF 3.5" catless or catted downpipe for your N55 (E-Chassis). The ...

We are proud to introduce the VRSF 3.5" catless or catted downpipe for your N55 (E-Chassis). The 3.5" downpipe is THE best bang for the buck mod available. By eliminating the restrictive catalytic converter in the factory downpipe, back pressure is reduced significantly which results in faster spool, an increase in power & a more aggressive exhaust note. This downpipe feature a full 3.5" stainless steel design as well as a cast 304 grade stainless steel merger that offer a smooth transiti...

$289.00

VRSF - Stainless Steel Catless Downpipes - BMW ...

We are proud to introduce our VRSF Catless Downpipes for the N63 F06/F10/F12/F13/F15 M5 & M6 ...

We are proud to introduce our VRSF Catless Downpipes for the N63 F06/F10/F12/F13/F15 M5 & M6 which feature a CNC stainless steel v-band to pipe transition. These downpipes are the best bang for the buck mod available for your N63, with gains from 50hp & 60tq when tuned. By eliminating the restrictive catalytic converters in the factory downpipes, back pressure is reduced significantly which results in faster spool, an increase in power & a more aggressive exhaust note. Rather than...

$449.99

VRSF - Charge Pipe Upgrade Kit - BMW N54/N55

Increase throttle response and decreases turbo lag with the VRSF chargepipe for your 135i/335i/33...

Increase throttle response and decreases turbo lag with the VRSF chargepipe for your 135i/335i/335is. Our aluminum chargepipe features a CNC billet aluminum OEM throttle body flange and is finished in powder-coated black. The VRSF chargepipe retains the OEM c-clip in order to provide a better seal over a conventional clamp/coupler design. We also offer the chargepipe with a Tial or HKS bov flange as well as a N55 setup. Two plugged meth bungs are included for those who are currently using met...

$149.99

DOC RACE DR700 N54 BOTTOM MOUNT SINGLE TURBO KI...

You are looking at the special price pre order of our new bottom mount turbo kits.  We are expect...

You are looking at the special price pre order of our new bottom mount turbo kits.  We are expected to ship our pre ordered kits 3/01/21.  You can fully pay for your kit by adding to cart here or if you would like to put 1/2 down on your kit today and the balance before we ship your kit please contact us.  Upon purchasing your kit you will receive your turbocharger drop shipped directly to you within 2-4 weeks.  The rest of your kit will be shipped by 3/01/21.  We will try our best to keep ev...

$3,995.00

Eisenmann - Performance Catless Downpipes - BMW...

For the ultimate in tuning potential and exhaust sound, Eisenmann offers these stainless steel ca...

For the ultimate in tuning potential and exhaust sound, Eisenmann offers these stainless steel catless downpipes to make the F8X M3/M4 & the F87 M2 Competition an even more powerful machine. This setup is intended for dedicated track-day cars and enthusiasts, and it will also add to the overall experience of what’s already a stunning performance car for any discerning driver. The catalytic converters found in the factory downpipes are the primary causes of exhaust flow restriction. Exhaus...

$1,395.00

S85 VT2-650/675 8PK Drive Upgrade Kit

Product Description Complete 8rib beltdrive system upgrade for E...

Product Description Complete 8rib beltdrive system upgrade for ESS S85 Gen.1 VT2-650 and Gen.2 VT2-675 supercharger system. 100% bolt-on, massively increases belt traction under heavy loads.

$1,995.00

ESS Tuning F8X M3 / M4 Silicone Charge Pipe Set

In both modified and stock applications, the F8X M3 / M4 OEM charge pipes can fail cau...

In both modified and stock applications, the F8X M3 / M4 OEM charge pipes can fail causing a significant loss in power. The ABS plastic used in the construction of them is durable, however with time and due to the high levels of boost that the S55 motor produces, they are constantly under stress. ESS Tuning's charge pipes are constructed from steel reinforced, five layer silicone. The silicone construction allows for ease of install, where the steel reinforcement provides rigidity ...

$495.00

ESS Tuning F87 M2 Competition Silicone Charge P...

In both modified and stock applications, the F87 M2c OEM charge pipes can fail causing...

In both modified and stock applications, the F87 M2c OEM charge pipes can fail causing a significant loss in power. The ABS plastic used in the construction of them is durable, however with time and due to the high levels of boost that the S55 motor produces, they are constantly under stress. ESS Tuning's charge pipes are constructed from steel reinforced, five layer silicone. The silicone construction allows for ease of install, where the steel reinforcement provides rigidity that...

$495.00

ESS N62 G1 Supercharger System

Product Description ESS is proud to offer the newly developed N62 E-Charger G1 based s...

Product Description ESS is proud to offer the newly developed N62 E-Charger G1 based supercharger system for the BMW N62 engine family. This supercharger system is designed to offer the customer a very quick and easy, 100% bolt-on installation with perfect software integration and retained valvetronic operation for increased fuel efficiency. With this supercharger system we bump the power output by 130-150 horsepower! Some of the more noteworthy features of the supercharger are: E...

$5,995.00

ESS E9X M3 VT2-650 Supercharger System

Featuring the newly developed, self contained Vortech V3 supercharger unit in Si trim ...

Featuring the newly developed, self contained Vortech V3 supercharger unit in Si trim which is capable of up to 775hp. The E9x M3 VT2-650 supercharger system comes with a high capacity liquid intercooler system and especially developed cast aluminum manifold assembly with integrated heat exchanger. It also features a custom crankshaft pulley system specific for the VT2-650 version. The supercharger system includes redesigned ESS MSS60 engine control software that is perfectly cal...

$9,495.00

ESS E9X M3 VT2-625 Supercharger System

ESS Tuning is a name that has become synonymous with uncompromised performance and rel...

ESS Tuning is a name that has become synonymous with uncompromised performance and reliability in the automotive industry when talking about supercharging and tuning BMW’s. With over 1700 units sold, our E9X M3 supercharger kit is by far the most proven system in the world.The intercooled E9X M3 VT2-625 supercharger system produces 625hp and 410lb-ft of torque at 6.5-7psi of boost. A 211hp gain over stock, which is more than a Mercedes SLS Black Series.Our kit improves upon the OEM...

$7,495.00

ESS E9X M3 VT2-595 Supercharger System

Product Description ESS Tuning is a name that has become synonymous with uncompromise...

Product Description ESS Tuning is a name that has become synonymous with uncompromised performance and reliability in the automotive industry when talking about supercharging and tuning BMW’s. With over 1700 units sold, our E9X M3 supercharger kit is by far the most proven system in the world. The entry-level intercooled E9X M3 VT2-595 supercharger system produces 595hp and 395lb-ft of torque at 6psi of boost. A 181hp gain over stock, which pushes the HP figure higher than a Ferra...

$6,995.00

ESS E9X M3 VT1-550 Supercharger System

Featuring the newly developed, self contained Vortech V3 supercharger unit in Si trim ...

Featuring the newly developed, self contained Vortech V3 supercharger unit in Si trim which is capable of up to 775hp. The E9x M3 VT1-550 supercharger system comes with an especially developed cast aluminium manifold assembly with built in velocity stacks. The VT1 non-intercooled configuration uses a similar cast aluminium manifold assembly without the integrated heat exchanger. VT1 kits are fully upgradeable to VT2 spec, contact us for details and pricing. The supercharger syste...

$6,795.00

ESS E9X M3 Underdrive pulley 6/08-2013

Our specially designed and engineered S65 underdrive pulley kit is a great addition to...

Our specially designed and engineered S65 underdrive pulley kit is a great addition to the M3.  This is done by improving power through reducing parasitic drag on the engine from slowing the speed of the alternator, water pump and AC compressor components. Hp Gains are approx 10-20hp depending on condition of car, climate, and other performance products. For maximum performance, we also suggest pairing our full exhaust system with our specially designed performance software   Featu...

$295.00

ESS E9X M3 Underdrive pulley 2007-05/08

Our specially designed and engineered S65 underdrive pulley kit is a great addition to...

Our specially designed and engineered S65 underdrive pulley kit is a great addition to the M3.  This is done by improving power through reducing parasitic drag on the engine from slowing the speed of the alternator, water pump and AC compressor components. Hp Gains are approx 10-20hp depending on condition of car, climate, and other performance products. For maximum performance, we also suggest pairing our full exhaust system with our specially designed performance software   Featu...

$295.00

ESS E9X M3 G1 Intercooled Supercharger System

ESS Tuning is a name that has become synonymous with uncompromised performance in the ...

ESS Tuning is a name that has become synonymous with uncompromised performance in the BMW world. With over 2000 S65 supercharger systems sold since 2008, our E9X M3 S65 supercharger kit is by far the most popular BMW supercharger system worldwide.The intercooled S65 G1 Supercharger System produces a massive 150-180whp gain from stock depending on fuel used and exhaust system installed. It is supplied with both 91AKI/95RON and 93AKI/98RON pulleys as standard.Our kit improves upon th...

$7,695.00

ESS E85 Z4M VT2-525 Supercharger System

The ESS Z4M VT2-525 SC system is based on the Vortech V3Si supercharger unit capable o...

The ESS Z4M VT2-525 SC system is based on the Vortech V3Si supercharger unit capable of 775HP. The systems are full systems including, 20mm Certal aluminum main bracket for superior rigidity, custom molded high temperature kompressor inlet housing, cast aluminum intake manifold with integrated high capacity bypass valve system, high-capacity front mount intercooler system and custom tuned ESS ECU software with removed dyno limiter and top speed governor. Fueling is provided by new,...

$8,295.00

ESS E85 Z4M VT1-455 Supercharger System (Gen.3)

The ESS S54 VT1-455 SC system is based on the Vortech V3Si supercharger unit capable o...

The ESS S54 VT1-455 SC system is based on the Vortech V3Si supercharger unit capable of 775HP. The systems are full systems including, 20mm Certal aluminum main bracket for superior rigidity, custom molded high temperature kompressor inlet housing, cast aluminum intake manifold with integrated high capacity bypass valve system, and custom tuned ESS ECU software with removed dyno limiter and top speed governor. Fueling is provided by new, larger direct replacement Bosch Motorsport f...

$6,795.00

ESS E85 Z4 VT1 Supercharger System

ESS is proud to offer the newly developed Vortech V3Si based VT1 supercharger system f...

ESS is proud to offer the newly developed Vortech V3Si based VT1 supercharger system for the BMW M52TÜ and M54 engine family. This supercharger system is designed to offer the customer a very quick and easy, 100% bolt-on installation. With this supercharger system we bump the power output by 40-50% depending on engine size! With lots of room to grow! Some of the more noteworthy features of the supercharger are: Vortech V3 supercharger: This supercharger system incorporates the Vor...

$4,495.00

ESS E85 Z4 Boost Upgrade Kit incl E-Flash cable

ESS TS2+ 8.5PSI upgrade kit for the ESS TS2 8PSI SC system. This kit requires installa...

ESS TS2+ 8.5PSI upgrade kit for the ESS TS2 8PSI SC system. This kit requires installation of the ESS FI camshafts and it is recommended to have a set of headers installed as well to take full advantage of the extra airflow generated by this setup.ESS E-Flash cable with software license is included.Upgrade kit consists of: Custom CNC Lysholm SC pulley for higher SC RPM and higher boost pressure.6PK ContiTech drive belt matched to the new pulley configuration.Dyno tweaked ESS MS43/4...

$795.00

ESS E6X M5 / M6 VT2-675 Supercharger System (Ge...

Featuring the self contained Vortech V3 supercharger unit in Si trim which is capable ...

Featuring the self contained Vortech V3 supercharger unit in Si trim which is capable of up to 775hp.The S85 VT2-675 Gen.2 intercooled supercharger system comes with an especially developed cast aluminium manifold assembly with a integrated liquid to air chargecooler. A large capacity front mount heat exchanger and high performance circulation system cools the manifold mounted chargecooler.The Gen.2 version of the S85 system has a different manifold casting with flow optimized, inj...

$9,495.00

ESS E6X M5 / M6 VT2-660 Supercharger System

Featuring the self contained Vortech V3 supercharger unit in Si trim which is capable ...

Featuring the self contained Vortech V3 supercharger unit in Si trim which is capable of up to 775hp.The S85 VT2-660 Gen.2 intercooled supercharger system comes with an especially developed cast aluminium manifold assembly with a integrated liquid to air chargecooler. A large capacity front mount heat exchanger and high performance circulation system cools the manifold mounted chargecooler. The Gen.2 version of the S85 system has a different manifold casting with flow optimized, in...

$9,295.00

ESS E6X M5 / M6 VT1-635 Supercharger System

Featuring the self contained Vortech V3 supercharger unit in Si trim which is capable ...

Featuring the self contained Vortech V3 supercharger unit in Si trim which is capable of up to 775hp. The S85 VT1-635 Gen.2 supercharger system comes with an especially developed cast aluminium manifold assembly. The VT1 non-intercooled configuration uses the same cast aluminium manifold assembly as the VT2 systems and is easily upgradeable. Contact us for details. The Gen.2 version of the S85 system has a different manifold casting with flow optimized, injection molded throttle bo...

$7,795.00